Add to Cart
Dimensions(unit in "mm")
Specifications
Rated capacity | 20N 50N 100N (Customizable) |
Rated output | 1.0±20%mV/V |
Excitation | 3-6V |
Zero balance | ±0.1mV/V |
Nonlinearity | ±0.05% R.O. |
Hysteresis | ±0.05% R.O. |
Nonrepeatability | ±0.03% R.O. |
Creep(2min) | ±0.05% R.O. |
Safe overload | 150% F.S. |
Ultimate overload | 200% F.S. |
Compensated temperature | 0...+25oC |
Operating temperature | -10...+40oC |
Temperature shift zero | ±0.2% R.O./oC |
Temperature shift span | ±0.05% R.O./10oC |
Input resistance | 1130±100 ohms |
Output resistance | 1000±100 ohms |
Insulation resistance | >2000M ohms |
Ingress protection | IP62 |
Material of element | Aluminum alloy |
Cable | 30AWG*180mm(Longer cable available) |
Wiring code | Red--Exc+ Black--Exc- |
Micro load cell sensor is a transducer that converts mechanical force into electrical signal which is proportional to the weight(or force) being applied.The measured load or force causes deformation of the measuring element(elastic body),the bonded strain gauge deforms accordingly which will cause the resistance change of the wheatstone bridge,under constant power supply,the output signal between Sig+ and Sig- will change proportionally,thus the load/force can be measured by measuring the output signal from the load cell.