Add to Cart
Reaction torque sensor 20NM 50NM 100NM 200NM Flange torque sensor
Features
Dimensions
Specifications
Rated capacity | 10Nm / 88 lbf-in / 1kgf*m |
Rated output | 1.5mV/V |
Excitation | 3-15V |
Zero balance | ±0.05mV/V |
Nonlinearity | ±0.2% R.O. |
Hysteresis | ±0.2% R.O. |
Nonrepeatability | ±0.1% R.O. |
Creep(10min) | ±0.1% R.O. |
Safe overload | 150% F.S. |
Ultimate overload | 200% F.S. |
Compensated temp. | -10...+40oC |
Operating temp. | -20...+60oC |
Temp. shift zero | ±0.02% R.O./oC |
Temp. shift span | ±0.02% R.O./oC |
Input resistance | 380±30 ohms |
Output resistance | 350±10 ohms |
Insulation resistance | >2000M ohms |
Ingress protection | IP50 |
Material of element | Stainless steel |
Cable | Ø5*3000mm 4-core shielded |
Wiring code | Clockwise@ Red--Exc+ Black--Exc- Green--Sig+ White--Sig- |
A torque sensor is a transducer that converts a torsional mechanial input into an electrical output signal. Torque transducer can be devided into two types:rotary torque sensor and reaction torque sensor depending on the torque it's going to measure.Rotary torque sensors are able to measure both rotating torque and non-rotating torque while reaction torque transducers can only measure non-rotating torque or torque with small rotating angle.
Flange type reaction torque sensor FTG is designed to measure static torque which is also known as reaction torque.The output range of FTG is normally between -20~20mV which is proportional to applied torque, signal conditioner can be used to get ±5V,±10V,0-5V,0-10V or 4-20mA output for easy data acquisition.
Torque indicator can be used to display the torque value.Digital meter FPT is integrated with high accuracy 24-bit ADC,up to 960Hz sampling speed make it suitable for both static measurement and dynamic measurement.FPT also supports RS485/RS232 communication interface and amplified signal output 0-10V/0-5V/4-20mA which is proportional to the measured value.