Add to Cart
M8 rod end tension load cell 0.5kN 1kN 2kN 3kN 5kN tension force measurement
Rod end tension load cell FL34 is made of stainless steel using strain gauge technology,pull load cell FL34 is available in 0.5kN / 1kN / 2kN / 3kN / 5kN five rated capacities,the force sensor features M8 threaded rods on two sides for the mounting of attachments or implements for both tension and compression force measurement,you may find model FL34 suitable for applications such as force overload protection,press-in force measurement,cylinder push pull force measurement,in-line force measurement,auto equipment,production line,press machine.etc.A force sensor is a transducer that converts force acting on it into electronic signal which is proportional to the applied force.The acting force causes deformation of the measuring element,the bonded strain gage deforms accordingly which will cause the resistance change of the wheatstone bridge,under constant power supply,the output signal between Sig+ and Sig- will change proportionally,thus the force can be measured by measuring the output signal from the load cell.Tension and compression force transducer FL34 is designed to measure force in both tension and compression direction,outputs millivolt signal ranging -20~20mV, and signal amplification may be required for most applications, a load cell signal conditioner can be used to get -5~5V, 0-10V or 4-20mA signal which is proportional to applied force.The amplified output is can be easily processed by PLCs and data acquisition software.The force can be displayed through force indicator,force meter FPT is integrated with high accuracy/low noise 24 bit Sigma-Delta ADC,sampling speed up to 960Hz makes it suitable for both static and dynamic measurement;FPT also supports Modbus RTU protocol with RS485 or RS232 communication port,amplified signal 0-5V,0-10V,0-20mV or 4-20mA is also achievable from FPT.
Specifications
Rated capacity | 500N / 50kg / 112lb 1000N / 100kg / 225lb 2000N / 200kg / 450lb 3000N / 300kg / 674lb 5000N / 500kg / 1.12klb |
Rated output | 1.5 mV/V |
Excitation | 3-15V |
Zero balance | ±0.05mV/V |
Nonlinearity | ±0.5% of R.O. |
Hysteresis | ±0.5% of R.O. |
Nonrepeatability | ±0.2% of R.O. |
Creep(5min) | ±0.1% of R.O. |
Safe overload | 150% of F.S. |
Ultimate overload | 200% of F.S. |
Compensated temperature | -10...+40oC |
Operating temperature | -20...+60oC |
Temperature shift zero | ±0.02% R.O./oC |
Temperature shift span | ±0.02% R.O./oC |
Input resistance | 385±30 ohms |
Output resistance | 350±5 ohms |
Insulation resistance | >5000M ohms |
Ingress protection | IP66 |
Material of element | Stainless steel |
Cable | Ø4*3000mm 4-core shielded cable |
Wiring code | Compression @ Red--Excitation+ Black--Excitation- |
Dimensions(unit in "mm)