Add to Cart
Multiple axis force sensor 1kN 500N 300N 200N 100N Multiple axis load cell
Multiple axis force sensor F3G is designed to measure force in Fx/Fy/Fz at the same time,each axis is able to measure force in both tension and compression direction.Very low profile design with total 26mm height makes F3G suitable for 3-axis force measurement where mounting space is limited.Typical applications for this type of transducer are for example force exertion control in robotics,automotive crash testing,industrial test benches,grinding force control,actuator operating force measurement and so on.
Specifications
Rated Capacity | Fx/Fy/Fz-20N 30N 50N 100N 200N 300N 500N 1000N |
Sensitivity | 1.0mV/V |
Excitation | 3-15V |
Zero balance | ±0.05mV/V |
Non-linearity | ±0.2% R.O. |
Hysteresis | ±0.2% R.O. |
Non-repeatability | ±0.1% R.O. |
Creep(5min) | ±0.05% R.O. |
Safe overload | 150% F.S. |
Ultimate overload | 200% F.S. |
Compensated temperature | 0...+40oC |
Operating temperature | -10...+60oC |
Temperature shift on zero | ±0.03% R.O./oC |
Temperature shift on span | ±0.02% R.O./oC |
Input resistance | 385±50 ohms |
Output resistance | 350±10 ohms |
Insulation resistance | >2000M ohms |
Ingress protection | IP62 |
Material of element | <100N Aluminum alloy >50N Stainless steel |
Cable | Ø6*3000mm 12-pin shielded cable |
Wiring code | 4-wire connection for each axis |
Multiple axis force sensor 1kN 500N 300N 200N 100N 50N 20N triaxial load cell
Dimensions(Unit in "mm)
Ordering code of multiple axis force sensor F3G
Ordering code | Capacity | Material | |
Fx=Fy | Fz | ||
F3G-20N | 20N | 20N |
Aluminum alloy |
F3G-20-20-30 | 30N | ||
F3G-30N | 30N | 30N | |
F3G-30-30-50 | 50N | ||
F3G-50N | 50N | 50N | |
F3G-50-50-100 | 100N | ||
F3G-100N | 100N | 100N |
Stainless steel |
F3G-100-100-200 | 200N | ||
F3G-200N | 200N | 200N | |
F3G-200-200-300 | 300N | ||
F3G-300N | 300N | 300N | |
F3G-300-300-500 | 500N | ||
F3G-500N | 500N | 500N | |
F3G-500-500-1k | 1kN | ||
F3G-1kN | 1kN | 1kN |