Add to Cart
Flange to Flange Tension Load Cell 2kg 5kg 10kg 20kg 50kg 100kg 200kg
Flange to flange compression and tension load cell FFG is made of stainless steel utilizing strain gauge technology to deliver maximum 0.1% non-linearity of rated capacity.Miniature tension load cell FFG offers 2kgf / 5kgf / 10kgf / 20kgf / 50kgf / 100kgf / 200kgf seven rated capacities to choose from,force transducer FFG is suitable for both tension and compression force measurement. Stainless steel construction, flange-to-flange mounting, compact size, bidirectional force measurement, high accuracy, miniature tension force sensor FFG offers a perfect mixture for applications such as wire tension control, force distribution analysis, automated control, assembly force monitoring, spring testing, ultrasonic welding clamp force control, hand press force verification,and so on. In addition to the standard specifications, Forsentek is also capable of and willing to provide custom design service to meet requirements of different applications.
Ordering code | Measurement Range | Force direction |
FFG-20N | 0-20N / 0-2kgf | Tension/compression |
FFG-50N | 0-50N / 0-5kgf | |
FFG-100N | 0-100N / 0-10kgf | |
FFG-200N | 0-200N / 0-20kgf | |
FFG-500N | 0-500N / 0-50kgf | |
FFG-1kN | 0-1000N / 0-100kgf | |
FFG-2kN | 0-2000N / 0-200kgf |
Specifications
Rated capacity | 20N / 50N / 100N / 200N / 500N / 1kN / 2kN 2kg / 5kg / 10kg / 20kg / 50kg / 100kg / 200kg 4.5lb / 10lb / 20lb / 45lb / 110lb / 220lbs / 450lbf | ||
Rated output | 2.0 mV/V | Compensated temperature | -10...+40oC |
Excitation | 3-15V | Operating temperature | -20...+60oC |
Zero balance | ±0.05mV/V | Temperature shift zero | ±0.02% R.O./oC |
Nonlinearity | ±0.1% R.O. | Temperature shift span | ±0.02% R.O./oC |
Hysteresis | ±0.1% R.O. | Input resistance | 380±30 ohms |
Nonrepeatability | ±0.05% R.O. | Output resistance | 350±5 ohms |
Creep(5min) | ±0.05% R.O. | Insulation resistance | >5000Mohms |
Safe overload | 150% F.S. | Ingress protection | IP62 |
Ultimate overload | 200% F.S. | Material of element | Stainless steel |
Cable | Ø3*3000mm 4-core shielded cable | ||
Wiring code | Red--Power input+ Black--Power input- Green--Signal output+ White--Signal output- |
Output signal of load cell and amplifier:
Load cell output: = (Power supply * Rated output) * Load / Capacity
Rated output of Flanged Force Transducer FFG is normally around 2.0mV/V.
Power supply of Flange Type Force Sensor FFG is normally within 3-15V.
Load / Capacity is within 0-1.
So the output range of Traction/Compression Force Sensor FFG is normally within -30mV…+30mV.
Example one: Tensile Compressive Force Transducer FFG-50N with 2.0mV/V sensitivity powered by 10V DC,the output range is -20mV...+20mV.
Example two: Tension And Compression Load Cell FFG-20N with 2.0mV/V rated output powered by 5V DC,the output range is -10mV...+10mV.
The mV/V output from the wheatstone bridge sometimes can hardly be processed directly, a signal conditioner can be used with the load cell to deliver -5~5V, 0-10V or 4-20mA output.
Example one: Flange Type Tension Compression Sensor FFG-100N working with amplifier FSC(-10-10V)-24V,the Load-Voltage relationship will be 0-100N compression force VS 0-10V output, 0-100N tensile force VS 0-(-10V) output, which is linear regardless of the measurement error, 1V output corresponds to 10N compressive load, (-2V) output corresponds to 20N tension load, and so on.
Example two: Cylindrical Tension and Compression Load Cell FFG-1kN working with amplifier FSC(4-12-20mA)-24V,the Force-Current relationship will be 0-1kN compression force VS 12-20mA output, 0-1kN tension force VS 12-4mA, which is linear regardless of the measurement error, 12mA output corresponds to “0” load, 12.8mA output corresponds to 100N compressive load, 8mA output corresponds to 500N tensile load, and so on.
Flange to Flange Tension Load Cell 2kg 5kg 10kg 20kg 50kg 100kg 200kg